Electrolux ew1200i not spinning but plenty filling/emptying

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Electrolux ew1200i not spinning but plenty filling/emptying

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 11, 2009 at 7:57 pm #46984
    DrB
    Participant

    Hi

    I’ve got an Electrolux ew1200i that is not spinning and speeding through cycles filling and emptying and doing little washing and few turns of the drum.

    I’ve checked the belt underneath … it rotates the drum and it ain’t broke unless there is a separate belt for the dryer 😉
    The drain pipe has been checked and anyway it drains alright 🙂
    The drain filter is clear

    So no spinning at all and only a few drum turns with plenty of filling and emptying.

    Could it be to do with the out of balance mechanism or methinks the PCB is :tdown:

    On Thursday I did feel :bang: but now I feel like :taz:


    Any suggestions? (skip it not included 😆 )

    July 12, 2009 at 11:26 pm #291852
    Penguin45
    Participant

    Re: Electrolux ew1200i not spinning but plenty filling/empty

    There have been quite a few EW1200i machines over the years. The fault you describe is indicative of an electronic board failure – the timers’ advance is controlled by it on the early machines.

    Post up the pNc number (label by the door seal) and we might be able to narrow it down a bit.

    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.