Candy CIC324 AK fridge too cold

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Candy CIC324 AK fridge too cold

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • July 13, 2009 at 4:23 pm #47022
    snig
    Participant

    Customer has a candy cic324ak firdge freezer which is freezing stuff in the fridge. Seems to be thermistor fault which is not accesible. Looking thru other posts it seems a common problem and new probe can be foamed in. Any idea of position of existing probe ?

    July 13, 2009 at 5:09 pm #291959
    Penguin45
    Participant

    Re: Candy CIC324 AK fridge too cold

    Sent you some stuff.

    Chris.

    July 14, 2009 at 6:50 pm #291960
    snig
    Participant

    Re: Candy CIC324 AK fridge too cold

    Hi Chris, thanks for trying but i haven’t received anything? should i be looking in my Email or messages. ( although i have checked both ).

    July 14, 2009 at 6:54 pm #291961
    snig
    Participant

    Re: Candy CIC324 AK fridge too cold

    A HA. Just realised my Email address was not up to date. Be very grateful if you could try again now i’ve amended it.

    July 14, 2009 at 7:04 pm #291962
    Penguin45
    Participant

    Re: Candy CIC324 AK fridge too cold

    Re-sent.

    Chris.

    July 14, 2009 at 8:08 pm #291963
    snig
    Participant

    Re: Candy CIC324 AK fridge too cold

    Thanks for that. Very informative. At least it can be done and were not righting off the unit for the sake of an ntc.

    July 14, 2009 at 8:29 pm #291964
    a1al
    Participant

    Re: Candy CIC324 AK fridge too cold

    Hi chris

    Just read this post have just been out to one of these last week have module on order would be very interested in your sent info if it not to much trouble.

    Thanks

    al

    July 14, 2009 at 8:34 pm #291965
    Penguin45
    Participant

    Re: Candy CIC324 AK fridge too cold

    Done.

    Chris.

    July 15, 2009 at 6:14 am #291966
    pup
    Participant

    Re: Candy CIC324 AK fridge too cold

    a1al wrote:Hi chris

    Just read this post have just been out to one of these last week have module on order would be very interested in your sent info if it not to much trouble.

    Thanks

    ali been to few always module 😆

    August 5, 2009 at 6:01 pm #291967
    snig
    Participant

    Re: Candy CIC324 AK fridge too cold

    Been back with thermistor and info only to find thermistor is not where indicated. measured very carefully but just not there! very annoying as still the same amount of work involved. Be warned!!!!!

    August 6, 2009 at 4:11 pm #291968
    TeeMyob
    Participant

    Re: Candy CIC324 AK fridge too cold

    snig wrote:Been back with thermistor and info only to find thermistor is not where indicated. measured very carefully but just not there! very annoying as still the same amount of work involved. Be warned!!!!!

    Occasionaly they are nowhere near where they are suggested to be.

    August 6, 2009 at 4:33 pm #291969
    TeeMyob
    Participant

    Re: Candy CIC324 AK fridge too cold

    pup wrote:

    a1al wrote:
    Hi chris

    Just read this post have just been out to one of these last week have module on order would be very interested in your sent info if it not to much trouble.

    Thanks

    ali been to few always module 😆

    Ive been to 100’s, nearly always NTC (thermistor)

    Trev

    November 30, 2010 at 7:37 pm #291970
    robstech
    Participant

    Re: Candy CIC324 AK fridge too cold

    TeeMyob wrote:

    snig wrote:
    Been back with thermistor and info only to find thermistor is not where indicated. measured very carefully but just not there! very annoying as still the same amount of work involved. Be warned!!!!!

    Occasionaly they are nowhere near where they are suggested to be.


    Hi

    any information regarding the possible location of the fridge ntc would be appreciated.

    Regards
    Rob

    February 7, 2012 at 9:58 am #291971
    robedoo
    Participant

    Re: Candy CIC324 AK fridge too cold

    I’ve just ordered a probe for one of these any info in fitting would be both appreciated. thanx

  • Author
    Posts
Viewing 14 posts - 1 through 14 (of 14 total)
  • You must be logged in to reply to this topic.