Bendix BIW125W Only Pumps

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bendix BIW125W Only Pumps

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 17, 2009 at 9:32 am #47143
    neilsukwg
    Participant

    Got this bendix machine that will only pump on all positions

    Lights on are Prewash and door lock

    Pressure switch does not seem stuck and there is no anti flood device.

    Is it the main PCB? or am i missing something..

    July 17, 2009 at 1:00 pm #292453
    LJDomestics
    Participant

    Re: Bendix BIW125W Only Pumps

    tried pulling the pressure hose off? if u here it click if u do then try blowing down the tube itself.

    July 17, 2009 at 1:40 pm #292454
    wilf
    Participant

    Re: Bendix BIW125W Only Pumps

    check the resistance of the valve if the pump is used as a ballast for the valve a short valve would run the pump.

    wilf

    July 17, 2009 at 4:21 pm #292455
    neilsukwg
    Participant

    Re: Bendix BIW125W Only Pumps

    Tried the pressure switch, but not checked the inlet valves.

    Thanks, will check that.

    Neil

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.