zanussi zwf 1220

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi zwf 1220

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 17, 2009 at 9:32 am #47144
    bluejack
    Participant

    hi, zanussi zwf 1220 this machine is constantly filling checked all the usual suspects fill valves- blockages- preasure switch tube- blown in to preasure switch there are three clicks ,so before i replace the pcb has any one of you guys got any other ideas,thanks.

    July 17, 2009 at 2:29 pm #292456
    Martin
    Participant

    Re: zanussi zwf 1220

    If the machine fills constantly even on spin or drain only settings then clearly the triacs have blown on the PCB. Before replacing PCB look closely at those triacs to confirm which ones have blown and also replace the source component (i.e if the valve triacs have blown replace the valve as well. :wink:)

    July 17, 2009 at 4:51 pm #292457
    bluejack
    Participant

    Re: zanussi zwf 1220

    no its ok on spin and drain , its at fault on wash programes.

    July 18, 2009 at 7:38 am #292458
    Martin
    Participant

    Re: zanussi zwf 1220

    Are you sure the sump hose isn’t blocked or there’s a pin hole in the air hose then?

    July 19, 2009 at 7:11 am #292459
    bluejack
    Participant

    Re: zanussi zwf 1220

    I dont think there is a blockage it pumps out to fast, i connected a hose to the pressure switch and blew in to it i got three clicks but the machine contined to fill, do you know the readings i should get off the switch.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.