jlwd1406 Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › jlwd1406 This topic has 3 replies, 3 voices, and was last updated 16 years, 8 months ago by waters. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts July 24, 2009 at 4:50 pm #47309 watersParticipant Zanussi type washer drier .Machine fills then pause light flashes.Changing option to drain or spin causes the pause light to flash after a few seconds. No water in the machine drain or spin are ok.E36 error July 27, 2009 at 8:42 pm #293030 leavemetogetonwithitParticipant Re: jlwd1406 On the older ones with the ewm1000 pcb, E36 was “sensing circuit p.sw. anti-boil”. Does that give any clue? Mike. July 29, 2009 at 7:20 pm #293031 chris211Participant Re: jlwd1406 went to one of these a few weeks ago same code dryer element at fault i wuld start there, check for earth fault on element July 29, 2009 at 7:59 pm #293032 watersParticipant Re: jlwd1406 Thanks will look tomorrow Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In