jlwd1406

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › jlwd1406

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 24, 2009 at 4:50 pm #47309
    waters
    Participant

    Zanussi type washer drier .Machine fills then pause light flashes.Changing option to drain or spin causes the pause light to flash after a few seconds.
    No water in the machine drain or spin are ok.E36 error

    July 27, 2009 at 8:42 pm #293030
    leavemetogetonwithit
    Participant

    Re: jlwd1406

    On the older ones with the ewm1000 pcb, E36 was “sensing circuit p.sw. anti-boil”. Does that give any clue?
    Mike.

    July 29, 2009 at 7:20 pm #293031
    chris211
    Participant

    Re: jlwd1406

    went to one of these a few weeks ago same code dryer element at fault i wuld start there, check for earth fault on element

    July 29, 2009 at 7:59 pm #293032
    waters
    Participant

    Re: jlwd1406

    Thanks will look tomorrow

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.