AEG Lavamat 50420

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG Lavamat 50420

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 27, 2009 at 7:59 pm #47381
    M1
    Participant

    AEG Lavamat 50420 goes through complete wash but won’t spin (carbons Ok)

    Wait 10 mins -to 15mins and select spin and machine will spin, but the machine allways seems to spin, if spin selected on its own and it has not just done a complete wash.

    All valves are OK, no burn marks on PCB/timer.

    Any ideas (apart from the obvious timer fault)

    Thanks

    July 27, 2009 at 9:02 pm #293297
    martinm
    Participant

    Re: AEG Lavamat 50420

    if water is emptying quick enough and pressure bottle clear then youd have suspect motor overheating ant cutting out on its own toc

    August 3, 2009 at 8:24 pm #293298
    M1
    Participant

    Re: AEG Lavamat 50420

    Thanks for the reply martinm,

    I have tested the motor when it won’t spin and there is no open circuit therefore if there was a cut out internally in the motor it would go O/C if the motor was overheating.

    Useully there is a NTC in line with the Triac on the PCB, could this have a faullt and not working properly I am tempted to change it !


    Any thoughts ???

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.