bosch maxx WFL2050

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bosch maxx WFL2050

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 29, 2009 at 4:43 pm #47419
    mackos
    Participant

    HI guys got a bosch wfl 2050 can’t seem to reset it.If I turn it to off then on to a prog spin or drain it only pumps out if I put it to a wash prog it pumps out & I get wash action.I can flick it between active & ready but it makes no difference it still does the same & will not finish.any thoughts.Thanks Mack.

    July 29, 2009 at 6:26 pm #293405
    Penguin45
    Participant

    Re: bosch maxx WFL2050

    Sounds like a pressure switch problem to me.

    Chris.

    July 29, 2009 at 7:32 pm #293406
    mackos
    Participant

    Re: bosch maxx WFL2050

    thanks Chris I did have a look at the vipler hose & pressurestat if I remember right it did seem to have only one level should it be a two level switch.thanks Mack.

    July 29, 2009 at 8:39 pm #293407
    Penguin45
    Participant

    Re: bosch maxx WFL2050

    Single level plus flood protection – extra terminal will run the drain pump, so might be stuck?

    Chris.

    July 29, 2009 at 8:53 pm #293408
    mackos
    Participant

    Re: bosch maxx WFL2050

    thanks I will have a look tomorrow if I get a chance.Mack

    July 31, 2009 at 2:53 pm #293409
    mackos
    Participant

    Re: bosch maxx WFL2050

    Hi Chris I went back & checked the pressure switch that’s fine.Any other suggestions.Thanks Mack.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.