Hotpoint drum pulley

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint drum pulley

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 30, 2009 at 9:06 am #47439
    iadom
    Moderator

    Newish machine, WF321P

    Making a loud knocking noise when drum revolves. Seems to be coming from the drum pulley which is now an off white plastic job held on by one of the awful Indesit type torx bolts. 😥

    With the belt removed there doesn’t appear to be a crack in the pulley but it is a little loose on the flats of the drum shaft.

    Any of the Indesit/Comet engineers come across this?

    Jim.

    July 30, 2009 at 5:22 pm #293489
    johnnyj
    Participant

    Re: Hotpoint drum pulley

    I,ve had a couple Jim, but isnt common. JohnnyJ

    July 30, 2009 at 6:13 pm #293490
    iadom
    Moderator

    Re: Hotpoint drum pulley

    I don’t suppose it would stop it working but it makes an awful noise.

    Looks like a drum out job to change due to that stupid torx bolt as well. 😥

    It must have been done washing the bed sheets & table cloths from Alex Reed’s visit a couple of weeks ago. 😉

    Jim.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.