Siemens XLM 1200 washing machine water level

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Siemens XLM 1200 washing machine water level

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 30, 2009 at 11:37 am #47447
    JohnGGG
    Participant

    How can I adjust the water level on a Siemens XLM washing machine?
    I want to increase the wash and decreas the rinse water levels in my Siemens XLM 1200 washing machine. I have adjusted other machines before which normally have a simple variable resistor. The XLM has a module with several adjusting screws and they seem to interract with each other. Advice will need to clearly identify the adjusters.
    Thanks

    John

    July 30, 2009 at 6:26 pm #293503
    iadom
    Moderator

    Re: Siemens XLM 1200 washing machine water level

    You should not attempt to do this under any circumstances and I doubt there is a single trade member who will say otherwise.

    September 7, 2009 at 12:36 pm #293504
    JohnGGG
    Participant

    Re: Siemens XLM 1200 washing machine water level

    Seems strange. Surely if the level module fails and is replaced the technician will have to set the water levels. Siemens technicians must know how to do this.

    John

    September 7, 2009 at 3:26 pm #293505
    Washman
    Participant

    Re: Siemens XLM 1200 washing machine water level

    Hi

    The module is preset . If you mess with the level control then have a flood because of this , your insurance company will refuse to pay up.

    Mike

    September 7, 2009 at 4:46 pm #293506
    iadom
    Moderator

    Re: Siemens XLM 1200 washing machine water level

    As washman says, the pressure switch is preset. That goes for 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of all pressure switches on all machines on the market.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.