Haier No spin

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Haier No spin

Viewing 15 posts - 1 through 15 (of 17 total)
1 2
  • Author
    Posts
  • August 6, 2009 at 3:44 pm #47626
    pmb
    Participant

    HWC1460 otveme-
    If i put it on spin ( 11 minutes) It just distrebutes,
    Emptys fine, checked presure systom and brushes all O K.
    First Haier I have seen,
    Any ideas

    August 6, 2009 at 4:03 pm #294054
    kwatt
    Keymaster

    Re: Haier No spin

    pmb wrote:Any ideas

    Petrol, matches and customer education? 😉

    K.

    (Sorry, couldn’t resist it)

    August 6, 2009 at 4:16 pm #294055
    Martin
    Participant

    Re: Haier No spin

    Does it ramp up to full spin if you take the belt off?

    If yes……follow Ken’s advice.

    If no……errr?….Ken’s advice still stands.

    Be careful though…not too much petrol…OK? 😉 😛

    August 6, 2009 at 4:21 pm #294056
    bazza500
    Participant

    Re: Haier No spin

    Have you tried it empty? These machines are VERY sensitive to OOB loads.

    August 6, 2009 at 4:29 pm #294057
    funkyboogy
    Participant

    Re: Haier No spin

    yip that what i tell these high end appliance customers,
    it works better empty ….lol
    ps was it in a fancy house merc etc int he drive ??
    ally

    August 6, 2009 at 4:53 pm #294058
    helo_75
    Participant

    you need a modified pcb 😉

    August 8, 2009 at 6:35 pm #294059
    pmb
    Participant

    Re: Haier No spin

    “ you need a modified pcb”
    PCB sounds to expensive.
    Petrol. Is it that bad ? The control panel is good, easy to use and looks good unlike some new Hoover machines

    August 8, 2009 at 6:38 pm #294060
    helo_75
    Participant

    no theyre not expensive!!!!

    hit the pm button;)

    August 9, 2009 at 1:47 pm #294061
    PGS
    Participant

    Re: Haier No spin

    Try filling this apliance so the load distributes evenly. 9 out of 10 is due to unbalanced / half loads being washed. As said earlier the OOB is very sensitive.

    August 9, 2009 at 3:07 pm #294062
    helo_75
    Participant

    lol

    again

    IT WANTS A MODIFIED PCB

    and just incase u didnt get it

    IT WANTS A MODIFIED PCB

    August 10, 2009 at 6:49 pm #294063
    PGS
    Participant

    Re: Haier No spin

    Any idea of modified Pt No Halo

    August 12, 2009 at 6:26 pm #294064
    johnnyj
    Participant

    Re: Haier No spin

    Got one doing exactly the same, have to break the news to him it needs a pcb, what a pile of s&^{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}te.

    August 12, 2009 at 7:15 pm #294065
    helo_75
    Participant

    the part numbers no different to the original btw, some have new software on, some dont.. luckily. i can programme them

    August 12, 2009 at 7:37 pm #294066
    PGS
    Participant

    Re: Haier No spin

    Helo what gear do you need to reprog PCBs ?

    August 12, 2009 at 7:44 pm #294067
    BobHope
    Participant

    Re: Haier No spin

    pc software and a hardware interface are required.

    Bob.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 17 total)
1 2
  • You must be logged in to reply to this topic.