- This topic has 6 replies, 5 voices, and was last updated 16 years, 8 months ago by
.
-
Posts
-
cleaned out pressure bottle and left machine ok The place phoned next day to say machine stopped all lights off Checked all connections Changed on off switch bank Tried again machine started working Then stopped again messed about with wires to power board comes on again But keeps going off Changed power board still dead Must be open curcuit somewhere?????????????????? PLEASE HELP ……………………….REGAURDS DAL 0208 997 7704
Re: miele 5426
I went to this model which had similar symptons. The fault was a faulty door interlock.
HTH
Re: miele 5426
Should be a circuit diagram in a plastic wallet in the appliance. Switch bank were known to cause this problem, simple solder joint repair.
Re: miele 5426
check the lower ezl101 board along its bottom edge… its quite often that any moisture in the cabinet collects there… if not that or an obvious dry joint it will be the lower board that needs replacing
Re: miele 5426
thanks for info re miele info after tests it was the lower board thanks i will keep the contact with u incase of furthertrouble do u do many miele appliances ??? we have been doing them for 20 yrs but this is the ist time we have replaced o power board arnt they expensive ?? john on 0208 997 7704 torusselll 555
Re: miele 5426
yeah boards are about £400 ish from miele… ive been a miele commercial techintian for 12 years or so and have done three boards just this week….
- You must be logged in to reply to this topic.