F&P MW511 lights 3+4+8 on solid and beeping

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › F&P MW511 lights 3+4+8 on solid and beeping

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 17, 2009 at 7:03 am #47842
    24mech
    Participant

    Hi there I got home from work today and loaded the washer I turned it on and it started beeping at me and wouldnt turn off. Can some one please help me I need to know what lights 3 and 4 (the two before short wash green in color) and 8 (spin Red in color) being on and beeping continually means. I tried to carry out the diagnostic procedure you describe but as the machine goes streight into beeping its nadds off I cant do it. Please help I gotta get this thing going again thanks.

    August 17, 2009 at 11:54 pm #294773
    Penguin45
    Participant

    Re: F&P MW511 lights 3+4+8 on solid and beeping

    3,4 + 8 R->L suggests 140, which is not any sort of recognised code.

    Pull the plug and leave it for a while; then try the Diagnostics.

    Penguin45.

    August 18, 2009 at 6:31 am #294774
    24mech
    Participant

    Re: F&P MW511 lights 3+4+8 on solid and beeping

    Hi there I looked deeper into the fault code I got and worked it out as 0011001 = code 49 I looked around on here and worked that out to be cold water intake circuit, so I took the covers off and had a look at the solinoid it was at 60 ohms I took a look at the pcb and found some corrosion causing cross conections across 4 lines. I cleaned off the corrosion and rebuilt the washer. everything working perfectly again now thanks for your help with this guys. 😀

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.