- This topic has 4 replies, 2 voices, and was last updated 16 years, 7 months ago by
.
-
Posts
-
This machine runs cont with 1 min left on led clock..have cleaned waste outlet / pressure system/ when first tested I removed the pressure tube from switch and time on led went to 0….re-checked pressure tube into drum for any obstruction none found..re-tested removed tube again this time made no difference..still on 1 minute..could it be a pressure switch fault or pcb.!! (ran on spin only 1 min showed on clock and this worked ok)
can any bosch expert let me know. thanks John.You could check the heater element going down to earth . Also , if i remember correctly , the NTC fitted with the heater , if faulty , can cause this spurious prob too.
Re: Bosch WFO2465GB/01
Paul, the heater was damaged, though not enough to take out rcd but enough to cause this fault, as you correctly diagnosed. thanks John
- You must be logged in to reply to this topic.