- This topic has 3 replies, 3 voices, and was last updated 16 years, 7 months ago by
.
-
Posts
-
Don’t normally look at Miele…in for a penny.
Machines leaking every wash and two weeks ago the check inlet / filter light came on.
The light has only come on once.Not wanting to look a fool, i was wondering how to get the front off one of these, or if theres any data I can be sent?
Heres hoping!
Tim.
Re: Miele W827
remove a couple of screws at the bottom behind the kickplate and 1 or 3 bolts round the outside of the door seal, remove outer lip of seal and cuple of screws in the door lock and the front opens up on a hinge at the right hand side,
if its leaking there is a float in the bottom it could be the door seal or the filter not in tight enough.
(from memory)Re: Miele W827
when you open the front panel you’ll see a gasket around the front edge of the soap box housing. i’ve had at least four where there has been a slight leak from here. if it is this then pipe in a thin bead of silicon in the groove and refit the seal. when you reattach the front panel it”ll be o.k.
- You must be logged in to reply to this topic.