- This topic has 4 replies, 4 voices, and was last updated 16 years, 7 months ago by
.
Viewing 5 posts - 1 through 5 (of 5 total)
-
Posts
-
With either rinse or wash selected, inlet value pulses approximately every two seconds allowing a small amount of water in.
Inlet value resistance checked ok.
Voltage reading on the back of the value varies between 20 – 100 volts in the small time the inlet value operates, then shuts down for two seconds.
Model 857541015352
Serial 990624004357
Could this be the electrical unit or timer?
Thanks in advance
SpinfastRe: AWZ410 Whirlpool
its always a good idea to check carbons and heaters on these whirlpools,
if you have done that its most likely to be the timer.Re: AWZ410 Whirlpool
It’s basically a Servis in a dress, not a Whirlpool. Check everything and then replace the module, As usual.
Chris.
Viewing 5 posts - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.