inner door on hotpoint vtd00

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › inner door on hotpoint vtd00

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • September 2, 2009 at 11:57 am #48259
    funbobby
    Participant

    for the life of me cant see how you unhook the trim from the hinge seems to be moulded round it? any little knacks? much appreciated.

    September 2, 2009 at 1:02 pm #296083
    adv
    Participant

    Re: inner door on hotpoint vtd00

    cant u split the door trims?

    September 2, 2009 at 1:48 pm #296084
    Martin
    Participant

    Re: inner door on hotpoint vtd00

    Remove the 4 screws that hold both halves together then a Swiss Army knife blade between the two halves and it should open up like a Ronseal paint tin! 🙂

    September 2, 2009 at 5:23 pm #296085
    funbobby
    Participant

    Re: inner door on hotpoint vtd00

    sorry didnt make myself clear, door is split but the hinge is connected to the inner trim in such a way i cant see for the life of me how you disconnect it from the trim?? hard to explain but have never seen such a daft design im sure someone must have a knack.

    September 2, 2009 at 5:49 pm #296086
    helo_75
    Participant

    turn the hinges in as if the door was closed, lift the hinge upwards and away from the trim, quite easy really

    September 3, 2009 at 8:27 am #296087
    funbobby
    Participant

    Re: inner door on hotpoint vtd00

    so the hinge has to be loosened off then? as it wont lift when bolted on. wish i had the thing in front of me starting to forget the bloody design now!

    September 3, 2009 at 4:45 pm #296088
    funbobby
    Participant

    Re: inner door on hotpoint vtd00

    turns out hinge has to be unscrewed and pulled out completly then put into the trim one at a time, easy now ive done one!

    September 3, 2009 at 8:22 pm #296089
    helo_75
    Participant

    der/// yes, u have to take the door off first!!!!!!!!

    September 4, 2009 at 10:26 am #296090
    funbobby
    Participant

    Re: inner door on hotpoint vtd00

    you dont lift hinge helo think you are confused.

    September 4, 2009 at 3:38 pm #296091
    iadom
    Moderator

    Re: inner door on hotpoint vtd00

    funbobby wrote:you don’t lift hinge helo think you are confused.

    No, its you that confused all of us, we thought you had already removed the door complete with hinges which is the correct method. 🙂

    We didn’t realise you were trying to remove the inner door from the hinges whilst it was still attached to the machine. :rolls: 😀

    September 4, 2009 at 6:46 pm #296092
    helo_75
    Participant

    of course im confused, ive only fitted perhaps 50 or so of these, some while you were still repairing tdl machines

    maybe i shouldnt try and help anymore?

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.