Whirlpool AWG329

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWG329

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 30, 2003 at 4:08 pm #4827
    Ally
    Participant

    When I set this machine to spin on No7, It empties fine. Then it jumps to a 500 spin for 10 seconds approx, then stops turning. The pump continues running for the rest of the spin cycle? I suspect the module but I am not a 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure.

    October 1, 2003 at 10:54 am #105514
    Dave_Conway
    Participant

    Ally I had one of these with a similar problem a few years ago, IIRC they are made by Brandt. I replaced the module (not far short of £80 😯 )
    which made no difference at all.

    It turned out that a small restriction in the waste was causing a drain ‘time out’ error. 😳

    The blockage was not obvious as the machine seemed to drain all of the water ok, fairly quickly.

    May be worth a check 1st, or possibly the door lock, it looks on the diagram to have a double switch arrangement.

    HTH

    Dave.

    October 1, 2003 at 11:53 am #105515
    admin
    Keymaster

    reply

    could easily be the module at fault,we have changed several for this fault on slower spin speed prorammes

    Part number 481228218679

    Regards Ted 8)

    January 25, 2004 at 9:53 pm #105516
    DentedPorsche
    Participant

    Re: Whirlpool AWG329

    If it’s not a washer dryer, take out the door interlock. If there is a microswitch fitted to it, bypass the microswitch and try the machine.
    Sorry, although I work on Whirlpool machines I get lost with their model numbers. Too may different models for my liking.

    Brian

    January 26, 2004 at 1:24 pm #105517
    PaulG
    Participant

    Re: Whirlpool AWG329

    The particular machine is crap. I have had the very same problem and had to get w’pool to replace it after throwing part after part at it, they are a nightmare to work on too. We are talking about the intergrated one here, right?

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.