zanussi zwd1227ow

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi zwd1227ow

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 3, 2009 at 12:04 pm #48293
    fozzey
    Participant

    hi got a zaussi washer dryer with no heat on the dryer .The dryer cycle
    runs right through the fan runs and it takes water in but no supply to the heater and no fault code..any idears

    September 3, 2009 at 12:26 pm #296195
    geoff1
    Participant

    Re: zanussi zwd1227ow

    Hi

    Have you checked the cut out fitted to side of heater tunnel? It is a manual reset version with a red push pin in the middle. Check for continuity through this cut out and if not push pin in to reset. ( cuts power to elements). If this has cut out check for blockages in the condensor etc as air flow has been restricted

    Geoff

    September 6, 2009 at 9:18 am #296196
    fozzey
    Participant

    Re: zanussi zwd1227ow

    hi geoff thanks for the reply yes i have checked this. the machine is only
    15 months old it looks as if it has a separate module for the dryer but not sure has anybody else come across this machine

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.