zanussi washer dryer…zwd12270w….

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi washer dryer…zwd12270w….

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 10, 2009 at 8:33 pm #48508
    admin
    Keymaster

    zwd12270w…..914604000
    went to this yesterday……..house let out to tenents….thay tell me that the machine stops after 1 hr and half still not spun out and rinsed….
    thay try to re set but it will not have it…… still has 7 mins to finish on the clock…?

    i did not have time to stay with the programe ….but it was not happy at locking the door and starting……but on spin it was happy to start….
    and the clock count down did change….flicker around with the numbers.?

    wash heater ok…….ntcs…..all ok ……pcb no dry joints ….sod to get out..water valves…ok fills ok…..pumps out fine….

    the dryer element was going to earth ……so a new one on order…..
    me thinks that this element must be upsetting the machine from finishing the wash programe properly……any one had this before……?????
    :rolls:
    canufixit

    September 10, 2009 at 10:33 pm #296767
    leavemetogetonwithit
    Participant

    Re: zanussi washer dryer…zwd12270w….

    Yep, common fault. Confirm by disconnecting element and it works OK.
    Mike.

    September 10, 2009 at 10:40 pm #296768
    admin
    Keymaster

    Re: zanussi washer dryer…zwd12270w….

    thanks for that mike …… 😀

    canufixit

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.