zanussi washer dryer…zwd12270w….

[admin]

zwd12270w…..914604000
went to this yesterday……..house let out to tenents….thay tell me that the machine stops after 1 hr and half still not spun out and rinsed….
thay try to re set but it will not have it…… still has 7 mins to finish on the clock…?

i did not have time to stay with the programe ….but it was not happy at locking the door and starting……but on spin it was happy to start….
and the clock count down did change….flicker around with the numbers.?

wash heater ok…….ntcs…..all ok ……pcb no dry joints ….sod to get out..water valves…ok fills ok…..pumps out fine….

the dryer element was going to earth ……so a new one on order…..
me thinks that this element must be upsetting the machine from finishing the wash programe properly……any one had this before……?????
:rolls:
canufixit

[leavemetogetonwithit]

Re: zanussi washer dryer…zwd12270w….

Yep, common fault. Confirm by disconnecting element and it works OK.
Mike.

[admin]

Re: zanussi washer dryer…zwd12270w….

thanks for that mike …… 😀

canufixit

[Author]

Posts