Siemens WK61420GB/13 no spin

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens WK61420GB/13 no spin

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 22, 2009 at 2:11 pm #48776
    Geoff1312
    Participant

    Hi Guys,
    Help please. Called to above machine it fills and washes in both directions. When spin is selected all it does is drains no drum action at all.
    Works ok on drying cycle i.e. tumbles both directions hot air and pump ok. I am thinking PCB am I right?

    p.s. Pressure pot not blocked as once it’s empty if you select wash it will fill again.

    Thanks in anticipation
    Geoff

    September 22, 2009 at 3:22 pm #297710
    Martin
    Participant

    Re: Siemens WK61420GB/13 no spin

    Geoff1312 wrote:I am thinking PCB am I right?

    Well maybe so Geoff but TBH that would render it BER as the power module is way over the top. They are a bugger to access and time consuming at best but a cursory inspection of the track side of that board may show a relay burnt problem?

    I’m assuming at this point you have checked that the motor is 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}? Brushes OK? No earth leaks there?…..motor is the main suspect after all in spite of it being able to tumble OK (seemingly?).

    Any earth leakage anywhere can cause errors of this nature so both water and dryer elements need meggering as does the dryer fan.

    My gut feeling = motor first port of call, 2nd = power module. 😥

    HTH? 🙂

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.