zanussi c/d TC7102W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi c/d TC7102W

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 23, 2009 at 11:34 am #48800
    richardable
    Participant

    this c/d tumbles but no heat. checked filter, condensor, and water tank. checked heater box and t/stats for break…all ok. found the exhaust stat at 12.o’clock but looks like a pig to check/change.. could it be the timer..?
    thanks
    richard

    September 23, 2009 at 12:35 pm #297769
    wilf
    Participant

    Re: zanussi c/d TC7102W

    if its the one I’m thinking of the stat at 12oclock is accessable from inside the door without major strip down. not too bad when you get down to it.

    wilf

    September 23, 2009 at 12:36 pm #297770
    timdowning
    Participant

    Re: zanussi c/d TC7102W

    The stat in the front at the 12 o’clock position is normal cause of no heat.

    Its a bit tight to access but you should be able to manage it.

    Just remember which way it came out and that you don’t lose the gasket.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.