FF72P Baffle

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › FF72P Baffle

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 23, 2009 at 9:27 pm #48822
    subs
    Participant

    This Hotpoint is freezing in the fridge. On testing the baffle i have continuaty through the motor (2 black wires) but none through the 2 white wires. Are the white wires the feed back to the board to tell position of baffle maybe. No fault code when i do test. Not sure if its fridge sensor or baffle. Baffle was actualy closed when i got there but opened when i put it back together so its doing something.

    Any Help Please?

    Subs

    September 24, 2009 at 6:45 am #297837
    spimps
    Participant

    Re: FF72P Baffle

    Fridge thermistor controls the baffle via the board so thermistor should read @20 c room temp 3k.
    If you need a diagram pm me.
    BG

    September 24, 2009 at 2:06 pm #297838
    subs
    Participant

    Re: FF72P Baffle

    Thanks spimps, so it seems like its going to be the sensor.
    What are the 2 white wires coming from the baffle, should’nt i be getting continuaty through them?

    Thanks

    Subs

    September 24, 2009 at 5:35 pm #297839
    spimps
    Participant

    Re: FF72P Baffle

    If the sensor fails it automatically leaves the baffle open,hence the freezing in fridge.
    Very small baffle motor can’t see any readings for it.
    Sensor is 2600284

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.