AEG Lavamat 86741 Error C6

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › AEG Lavamat 86741 Error C6

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 30, 2009 at 3:32 pm #48970
    gingerlotus
    Participant

    Hi, first post in desperation !!, 4 kids and a broken AEG Lavamat 86741 Update showing error C6 😯 . Quick google reckons its the pressure sensors, i have taken the top off and can see them and are about to order replacements but does anyone know if this could be the real cause of the c6 error.

    Carry out a reset but to no avail and error appears within seconds of selecting a wash programme

    Machine is about 5 yrs old

    Thanks in advance for any advice !!

    September 30, 2009 at 4:38 pm #298338
    TheSpinDoctor
    Participant

    Re: AEG Lavamat 86741 Error C6

    Product number beggining 914 please?

    September 30, 2009 at 4:55 pm #298339
    gingerlotus
    Participant

    Re: AEG Lavamat 86741 Error C6

    Sorry newbee!!

    PNC 914 002 562 00


    Thanks !

    September 30, 2009 at 5:29 pm #298340
    TheSpinDoctor
    Participant

    Re: AEG Lavamat 86741 Error C6

    C6 is caused by either a) defective mechanical pressure switch, b) defective pressure sensor or c) Defective wiring to either a or b.

    You may want to just remove the hoses from the switch & sensor, noting what hose went where & blow down them to see if they are clear. If not, trace blockage & clear, refit hoses & test.

    Before doing the above, please isolate the appliance from the mains electric supply.

    September 30, 2009 at 8:01 pm #298341
    gingerlotus
    Participant

    Re: AEG Lavamat 86741 Error C6

    Thanks very much for the advice, tried that but no change, 🙁 have managed to get an engineer out tomorrrow

    October 2, 2009 at 1:17 pm #298342
    gingerlotus
    Participant

    Re: AEG Lavamat 86741 Error C6

    Update….AEG is dead, concrete block on drum had worked loose and been smashing against the control board for about a year & it gave up the ghost. Excellent repair man tried everything to revive it and recomemned not spending any more money on it……however ordered an ISE10 today due for delivery Tuesday !!!

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.