WHIRPOOL ADG934 Stuck in empty

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › WHIRPOOL ADG934 Stuck in empty

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 3, 2009 at 11:11 am #49033
    admin
    Keymaster

    Hi , The machine goes to the drain cycle when started, The main on off light is blinking and I have tried resting it for 30secs but wont work. The machine appears to be stuck in the drain cycle, If I pour water into it it empties thro outlet. Cannot seem to reset the electrics. The drain motor stops and restarts if I open close the door. Any ideas appreciated, mechanically it seems oK as it was working with no problems.

    October 3, 2009 at 2:55 pm #298559
    Washman
    Participant

    Re: WHIRPOOL ADG934 Stuck in empty

    Hi

    The base has flooded and safety float activated to stop machine from flooding. You need to investigate for leaks. Also count the number of flashes this is the fault code.

    Washman

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.