Indesit WIB111/UK

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit WIB111/UK

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • October 8, 2009 at 2:55 pm #49183
    jackster
    Participant

    Hi all,
    I have got the above machine that has got the following fault code flashing at me:

    On/Off Button – Blinking
    Anti Crease light – Flashing
    Rapid Wash light – Flashing

    I couldnt find it in my book or on the forums? I have gota feeling its going to bethe pcb but thought Id check.

    Thanks, Chay

    October 8, 2009 at 3:43 pm #298990
    iadom
    Moderator

    Re: Indesit WIB111/UK

    Always best to give the lights by number from top down or left to right for error codes.

    October 8, 2009 at 4:14 pm #298991
    jackster
    Participant

    Re: Indesit WIB111/UK

    it’s the 3 across the top, the 3 from top to bottom on the left handside are off.

    October 8, 2009 at 5:30 pm #298992
    iadom
    Moderator

    Re: Indesit WIB111/UK

    FO3..NTC short/open circuit.

    Jim.

    October 8, 2009 at 5:54 pm #298993
    jackster
    Participant

    Re: Indesit WIB111/UK

    Thanks for that Jim

    October 13, 2009 at 10:01 am #298994
    jackster
    Participant

    Re: Indesit WIB111/UK

    Hi all,
    Sorry to bang on about this one but, I have replaced NTC but still the same. I have checked out all the normal culprits, element, valves etc and still no joy. I have postd below a pic of the fault code display, I calnt find it anywere. I have got a feeling it must be PCB?

    The 2 x green are flashing continuous, no pauses

    [/img]

    October 13, 2009 at 10:30 am #298995
    Davecas
    Participant

    Re: Indesit WIB111/UK

    just had similar one & found dry solder joint on board for heater relay, worth checking?

    dave

    October 13, 2009 at 5:30 pm #298996
    jackster
    Participant

    Re: Indesit WIB111/UK

    Yes I had one doing that myself a few weeks back and cured in exactly the same way, unfortunately this one isnt playing ball!

    I can only think it must be module, i have tried everything else! New NTC, heaters ok, wiring got no breaks etc…

    October 16, 2009 at 5:01 pm #298997
    jackster
    Participant

    Re: Indesit WIB111/UK

    Has anyone got the part number fot the module on this machine?

    October 19, 2009 at 7:14 pm #298998
    twinspark
    Participant

    Re: Indesit WIB111/UK

    this modual fits coo272261 but i can be more sure if you find the 5 digit comercial code (46470)
    they are all differant and model numbers are not the best way, neil 😀

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.