Bosch WFO2865GB/08

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WFO2865GB/08

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 9, 2009 at 2:19 pm #49205
    OLLIE2806
    Participant

    Hi guys,
    Got the above bosch washing machine that when you turn the dial to select a prog either nothing shows in the little display or just every line and dot is diplayed (8:88) and nothing happens other then the led moves from ready to the next relivant led (ie, wash or spin etc) but other then that nothing happens, but sometimes not even the leds light up.
    Should i be thinking board fault?
    Thanks in advance.
    Ollie

    October 9, 2009 at 2:33 pm #299108
    OLLIE2806
    Participant

    Re: Bosch WFO2865GB/08

    that was it sometimes shows 88:88 on the display and sometimes nothing at all.

    October 9, 2009 at 2:39 pm #299109
    Martin
    Participant

    Re: Bosch WFO2865GB/08

    OLLIE2806 wrote:Should i be thinking board fault?

    I’ve replaced a couple of module boards due to this fault so you may be right? However, word of caution, make sure you’ve checked all other possible avenues first? Power supply in, wall socket etc…. 😉

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.