- This topic has 6 replies, 4 voices, and was last updated 16 years, 6 months ago by
.
-
Posts
-
Rinse light flashing, have replaced brushes but still fault remains. I belled out the motor and was satisifed with that, but don’t want to change the EL200d pcb if I’ve missed something. Would i be able too just replace the White tacho housing? Or do people replace the complete motor
cheers
Re: Miele W827
dumb question…. did you pop the brushes back onto the armature???.. might be worth continuity checking the wires from the board to the motor
yer checked continuity from the schemtic from the board loom, and from the motor itself
do they have a change micro fuse on these boards or is it a complete pcb? EL200D, anyone got the part number for the pcb and the brush housing
cheers
Re: Miele W827
Can check for part numbers monday for you!!
Miele print part numbers on all their spares
you got the pcb with you?
Found this posted on this site might be worth a go and cheaper?
c.b.r.s.(leeds)
unit 2b sunny bank mills
84/85 town street
farsley
leeds
ls28 5uj
07949307385
cbrsleeds@msn.com
good cheap circuit board repairs
and thousands of refurbished boards
- You must be logged in to reply to this topic.