zan d/washer mod dx6453 not heating

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zan d/washer mod dx6453 not heating

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 12, 2009 at 7:27 pm #49272
    jasper
    Participant

    hi guys d/washer no heat checked all the usual problem areas ?…
    heater, ok!!..wiring loom at bottom of door(internal), ok, no broken wires,
    d/w goes thru the complete cycle??.., faulty control unit??..
    appreciate your input….
    jasper.

    October 12, 2009 at 7:49 pm #299390
    Jazzmeister
    Participant

    Re: zan d/washer mod dx6453 not heating

    This is a usual fault with these…check the back of the timer/module behind the facia panel….you will more than likely find the solder blown in the pcb where the relay goes….either repair or replace if that doesn’t work!

    Jazz!

    October 12, 2009 at 7:49 pm #299391
    Penguin45
    Participant

    Re: zan d/washer mod dx6453 not heating

    Dry joint, pcb.

    Chris.

    October 13, 2009 at 2:21 pm #299392
    jasper
    Participant

    Re: zan d/washer mod dx6453 not heating

    jazzmeister,and penguin45,
    thanks for your input fault sorted!!!….customer delighted with the requote,
    no!! control unit reuired eg;..r r p for said part apprx 100-00 quid plus.
    another satisfied cust.
    jasper.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.