- This topic has 7 replies, 3 voices, and was last updated 16 years, 5 months ago by
.
-
Posts
-
Hi, my dishwasher fails to finish it’s cycle and stop, it will not even spray any water when in cycle. Pumps ok though.
Re: Bosch SGS45E08GB Dishwasher not finishing or restarting
Cycle will not complete if no heat; there is a pressure switch in the heater box which needs circulation to allow the heater to activate. Therefore you need to look at the motor – it may be jammed or the start/run capacitor may have failed.
Remove r/h side panel for access – power off first.
Penguin45.
Re: Bosch SGS45E08GB Dishwasher not finishing or restarting
Are these visible after removing the panel?
Cheers
Re: Bosch SGS45E08GB Dishwasher not finishing or restarting
ok panel is off and I can see many parts, what am I looking for and what should I be doing?
Matt
Re: Bosch SGS45E08GB Dishwasher not finishing or restarting
Circulation motor is the square metal casing with the fan in the end. If turned manually, it should feel “heavy” but smooth running, in which case the capacitor is the most likely culprit. If it won’t move, you have a bigger problem.
Penguin45.
Re: Bosch SGS45E08GB Dishwasher not finishing or restarting
Peanut how long have you had the d/w, and how hard have you used it because its not an “old” model. I only ask out of interest because ive been doing a quite a few circulation-motor impeller replacements lately on a batch of 4-8 year old boschs and neffs :S
i dont know whats been happening lately but no4 this month is on its way to the w/shop next week!!! had 2 last month as well
- You must be logged in to reply to this topic.