Manual for Hotpoint CTD40P

This topic has 5 replies, 5 voices, and was last updated 16 years, 5 months ago by aqua_serve.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
October 19, 2009 at 8:26 pm #49447

aqua_serve
Participant

Guys,

I wonder if any of you would be able to supply me with the service manual for the Hotpoint CTD40P tumble drier.

I seem to be having problems with a machine I have come across, it’s a three stat version that occasionally provides heat, thermostats all appear to be ok, I’m right in thinking that the white sta should be open circuit aren’t I?

Any help would be appreciated.

Yours,

Mark

p.s. my email is mark_r_ryan@hotmail.com

October 19, 2009 at 9:07 pm #299932

aqualectric
Participant

Re: Manual for Hotpoint CTD40P

Have you checked the integrity of the insulating band under the contact track around the drum? If there is a short here it will affect the heating…..:wink:

Steve.

October 19, 2009 at 9:10 pm #299933

helo_75
Participant

u got mail

October 19, 2009 at 9:12 pm #299934

aqua_serve
Participant

Re: Manual for Hotpoint CTD40P

Cheers Guys

I appreciate your help, I’ll let you know how it turns out.

Mark

October 19, 2009 at 9:33 pm #299935

iadom
Moderator

Re: Manual for Hotpoint CTD40P

aqua_serve wrote: I’m right in thinking that the white sta should be open circuit aren’t I

Not really, its an NTC not a stat so it depends how you are testing it. 😉

October 22, 2009 at 2:04 pm #299936

ELTEL
Participant

Re: Manual for Hotpoint CTD40P

Hi mark the machine sounds like it has 2 stats and a thermistor
the thermistor is usually one piece moulded
unlike the stats if both stats are ok it could be the thermistor
some hotpoint machines have a front one as well as a rear

Hope this helps eltel
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.