Hotpoint WF541P very noisy when spinning

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint WF541P very noisy when spinning

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 24, 2009 at 3:26 pm #49589
    frankmoss
    Participant

    Hi
    Can anyone help the above washing machine is very noisy when its in a spin cycle, its seems ok when on washing cycle.
    When i spin it by hand it sound ok, ( no grinding sounds as if the bearing have gone)
    I have check and the weights are still attached to the springs and nothing appears to be not attached.

    Please any help its only 14 months old

    Thanks in advance

    Frank

    P.S .Have run it with nothing in and it sound normal ish not very noisy like when a load is in)

    October 24, 2009 at 4:17 pm #300350
    helo_75
    Participant

    id still try tightening the wieghts, even if theyre on…

    if the bearings havent gone, the weights either loose, or one of the suspension legs is broken, or the dreded drum spider

    October 24, 2009 at 6:30 pm #300351
    frankmoss
    Participant

    Re: Hotpoint WF541P very noisy when spinning

    I think i have fixed it the bottom weight was loose so have tightened it up,i think this has fix it

    Thanks all

    October 25, 2009 at 5:45 am #300352
    gandh1
    Participant

    Re: Hotpoint WF541P very noisy when spinning

    keep an eye on it – these were notorious for stripping the plasticy lugs on the drum. already had to drill through and bolt the weight on one machine, because otherwise the machine was a write-off… granted, it was a graded mode,l which i suspect its initial problem was therefore a loose weight, but all hotpoint did was add a bit of plastic padding filler, screw the screw in and send it back out. lasted 13 months and h/p didnt want to know when it went wrong.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.