- This topic has 2 replies, 3 voices, and was last updated 16 years, 5 months ago by
.
-
Posts
-
Hi,
I’ve got a problem with my Hotpoint FDW80.
When starting a program I can hear:
* The drain pump run
* The machine fill
* When the main pump should fire up, all I can here is a buzz.This has happened in the past, and I got someone in who replaced the large white capacitor that’s next to the circulation pump. I’m happy replacing this again myself, but I can’t find the part. Any pointers?
I’m also wondering why the same fault would be appearing a second time.
Paul
P.S. I should probably mention…. When I found the machine had failed it was displaying AL03, which I’ve found on this site means that draining failed. I also found directions to clear out the drain pump, which I’ve done but it was clean as a whistle. I’m pretty sure that’s not the problem and the alarm code is a red herring (as it was last time).[/list]
Re: Hotpoint FDW80 Circulation pump cap
We can supply most sizes of capacitor, it will have the rating on the side.
I would suggest making sure the motor hasn’t siezed up first though.
Unplug the machine, lie it on its left hand side ( from front ) and see if you can move the motor fan vanes by poking a small screwdriver through the motor casing and pushing the rotor vanes, it should move freely.
- You must be logged in to reply to this topic.