New World DW60 (Stoves)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › New World DW60 (Stoves)

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 2, 2009 at 7:55 pm #49822
    geoff1
    Participant

    This one is working at present but has intermitant fault of E3 ( ntc or heater Fault)

    Again circuit is fine from module through heater and there are no dry joints on module

    Anyone had a fault like this????

    Geoff

    November 2, 2009 at 9:38 pm #302445
    Jazzmeister
    Participant

    Re: New World DW60 (Stoves)

    DW 60 sounds a bell….is it a haier type…if so check the 2 safety cut ots underneath 1 will be o/c

    Jazz

    November 2, 2009 at 10:12 pm #302446
    geoff1
    Participant

    Re: New World DW60 (Stoves)

    Thanks Jazz

    This uint is branded as a new world but has stoves model number and product code number on it – not sure if this is the same as the one you are talking about. Haier machines yet to be seen on these islands as yet.
    This type has a heater with pressure chamber attached. Micro switch makes to allow power to heater once motor has water up to pressure?
    Does this sound the same?
    Could not see any additional saftey cut outs? where are they located?

    Geoff

    November 3, 2009 at 12:04 am #302447
    Penguin45
    Participant

    Re: New World DW60 (Stoves)

    DW60 in ‘Search’ brings up some results.

    Chris.

    November 4, 2009 at 8:18 am #302448
    geoff1
    Participant

    Re: New World DW60 (Stoves)

    Had a good search but nothing there. Machine still working fine so customer going to let me know when it goes faulty again. Will post reply if I do get an answer

    Geoff

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.