SMEG DWF614SS Diverter Valve

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › SMEG DWF614SS Diverter Valve

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 6, 2009 at 12:25 pm #49928
    legsthediver
    Participant

    NEVER been into 1 of these before. Fault code is E8 which suggests ‘Diverter’ Valve needs attention.. Can any one tell me where valve is situated and how to access AND service it.. MANY Thanks…

    November 6, 2009 at 12:34 pm #302770
    bzz67
    Participant

    Re: SMEG DWF614SS Diverter Valve

    From memory (which isn’t great), i think it is in a hose at bottom front. it has a flap in there that opens and closes, may just be sticking.

    November 6, 2009 at 6:01 pm #302771
    eastlmark
    Moderator

    Re: SMEG DWF614SS Diverter Valve

    bzz67 wrote:From memory (which isn’t great), i think it is in a hose at bottom front. it has a flap in there that opens and closes, may just be sticking.

    too true about the memory! 😥 ( I know the feeling though!)
    its at the back, centre, just next to the circ pump and fed from a hose from it, circular. 2 hoses and the 3rd water connection is direct into the sump under the lower spray arm. common failure. Have to repalce as its usually a leak from it that starts the problem. only retained by 2 screws and the hoses so an easy fix. (tip machine on side after first emptying the remains in the sump and the regen reservoir) You dont get the 3 o ring seals with the new one so you need to remove these and fit them back on the new one. 819130468

    November 6, 2009 at 8:30 pm #302772
    goosegreen
    Participant

    Re: SMEG DWF614SS Diverter Valve

    Did my first one a couple of weeks ago, following P45s advice. Easy job once you get the machine out. Masterpart supply them:SMG819130468 at about: £35 +.

    Goose

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.