Whirlpool S20DRWW30

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool S20DRWW30

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 6, 2009 at 5:14 pm #49939
    Vladd
    Participant

    Got a problem with this American fridge/freezer if someone can help.
    The problem started when the display on the freezer went to — and the alarm sounded, the freezer then stopped cooling. After replacing the rear module and freezer ntc, the freezer is cooling intermitantly and the fault re-occurs once the sense light goes out.

    Model 8586 159 15000
    Serial 110435 003411

    Purchased 2005

    I have read about maybe both the front and rear module might need replacing but cannot find a deffinate answer.

    Any help would be greatly appreciated.

    November 13, 2009 at 11:54 am #302799
    Vladd
    Participant

    Re: Whirlpool S20DRWW30

    Are there any Whirlpool guys out there who can help please ???

    I’ve spent long enough going through the public forum listing and still cannot see an answer.

    Any help would be greatly appreciated

    November 13, 2009 at 12:05 pm #302800
    jackster
    Participant

    Re: Whirlpool S20DRWW30

    It sounds like its either a faulty pcb or maybe the de-frost heater itself? Also worth checking for dust build up behind the grilll at the bottom.

    November 13, 2009 at 12:45 pm #302801
    Payney
    Participant

    Re: Whirlpool S20DRWW30

    What you have read about changing both boards is probably not going to apply here as the serial no. you have given means it was made after week 30 of 2004 and its only the models before this date that had a software conflict.
    If its freezing and then stops I would personaly check the defrost heater and connections to the defrost heater which somtimes expand.
    Hope this helps.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.