- This topic has 12 replies, 5 voices, and was last updated 16 years, 4 months ago by
.
-
Posts
-
hi all,zanussi zwf1621w,foreign object inside drum,anyone know an easy way to remove?thanks in advance 8)
Re: foreign object
rattling around in between inner and outer drum,nasty sounding and scrapping on the outer drum,locking up if rotated in anti clock wise direction.hth 8)
Re: foreign object
bazza took heater out and can see object trapped in between front of inner and outer drum,hth 8)
Re: foreign object
There was a whole thread on this some years ago. Each engineer has his preferred method.
From the previous thread I learned that it’s best to poke something flexible (e.g. green plastic coated garden wire) down into the tub gap. Then rotate drum and wire together until item is carried up and drops out under the influence of gravity. Will probably take several attempts. Don’t give up!
Mike.Last one I had I had to take the whole drum out!, could not get object (a key) through seal or element ect.
Turned out it was stuck behind cross piece.Customer had to pay for a tub job though.
Re: foreign object
guys took off boot and gently levered drum,objects now removed,now any tips how to get the damn boot back on?trying to get the spring back on seems like you need to be an octopus 😡
Re: foreign object
Oh dear, here we go again! There was a thread on this some years ago…..hang on a minute…..yes… do a search using the word, “AAAAaaarrrrrrggghhh!!!!”
Mike.Re: foreign object
Sorry, for some reason, AAAAaaarrrrrrggghhh!!!! doesn’t work!
Need to use “aargh” or click here.
Mike.Re: foreign object
all back together again 8) anyone want a washer that is leaking all over the place ❓ free to good home 🙁 🙁
Re: foreign object
there was a whole thread on these leaking a few……
….oh never mind! sounds like you had a great Sunday.
- You must be logged in to reply to this topic.