Hotpoint WD860P F13 fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WD860P F13 fault

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 16, 2009 at 1:53 pm #50178
    bandit2510
    Participant

    Hi guys just been to see this washer/dryer and it is coming up with an F13 fault. F13 is stat fault on dryer me thinks, heater ok. Has anyone got a part number or seen this before. 💡

    November 16, 2009 at 2:09 pm #303871
    twinspark
    Participant

    Re: Hotpoint WD860P F13 fault

    if it has filter in condenser can be just that 😀

    November 16, 2009 at 8:23 pm #303872
    leavemetogetonwithit
    Participant

    Re: Hotpoint WD860P F13 fault

    Dryer ntc. Probably one of the wires is broken. Pull gently and it’ll break. And welcome to the site.
    Mike.

    November 16, 2009 at 8:57 pm #303873
    Redflame
    Participant

    Re: Hotpoint WD860P F13 fault

    I’ve seen a few of the NTC type go out of tolerence recenly & even a couple go o/c – F13 is defo a thermister fault & don’t forget to fit a new filter everytime (cleaning just won’t cut it !)

    November 16, 2009 at 9:55 pm #303874
    helo_75
    Participant

    i just cut the filter out and snip the wire to the valve… works better than evver!

    November 17, 2009 at 10:40 am #303875
    bandit2510
    Participant

    Re: Hotpoint WD860P F13 fault

    Thanks for the replys guys. I am not too familiar with this new model..Is the filter easy to get to? anyone got a part number for dryer ntc. Appliance at cm house so would rather go fully armed. Great site and invaluable info. 😆 😥

    November 17, 2009 at 11:57 pm #303876
    leavemetogetonwithit
    Participant

    Re: Hotpoint WD860P F13 fault

    C00098739 I think. Never had to buy one myself.
    Mike.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.