- This topic has 1 reply, 2 voices, and was last updated 16 years, 4 months ago by
.
-
Posts
-
Hey!!
this dishwasher starts flashing the inlet/outlet light 5 times after a minute of filluing and pulse fills. Any ideas please? There was evidence of water leaking from small air hole in side tank. I replaced this as i had one.
:rolls: ❓Re: miele d/washer g611 – 5 flashes
Before rectifying the
problem you must:
– Turn the programme
selector to the “Stop”
position.
– Switch the dishwasher
off using the “On/Off”
button.
Water intake is restricted. – Open the stopcock
fully.
– Check the water inlet
filter and clean if
necessary, see
“Cleaning the water
inlet filter”.
– Check the water level
and if necessary
increase the water
intake time, see
sections on these.
Water outlet is restricted.
Water remains in the
wash cabinet at the end
of a programme.
– Clean the filter
combination, see
“Cleaning and Care”.
– Clean the drain pump,
see “Cleaning the
drain pump and nonreturn
valve”.
– Clean the non-return
valve, see “Cleaning
the drain pump and
non-return valve”.
– Remove any kink in the
drain hose.
Problem solving guide?
hope this helps? Brian
- You must be logged in to reply to this topic.