Whirlpool American Type Fridge Freezer Model S25DRBB33-A/G

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool American Type Fridge Freezer Model S25DRBB33-A/G

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • November 17, 2009 at 8:52 am #50203
    Taff
    Participant

    This appliance has a fault code of F1 which is I believe a blocked filter. This was replaced. The appliance was switched off for an hour to reset the fault as per the user manual. The fault is still indicated and the ice machine will not work. The cold water function operates fine with a plentifull supply of water. Any help with this would be appreciated.

    Regards

    Taff

    November 17, 2009 at 12:33 pm #303960
    bandit2510
    Participant

    Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A

    whirlpool SxS dont have f1 fault, is it alarming after a short period of time or are there other problems. Have you tried the test program.?

    November 17, 2009 at 9:24 pm #303961
    Taff
    Participant

    Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A

    Thanks for the reply. How is the test program entered? I have very little info on this appliance. Your assistance is much appreciated.

    Regards

    Taff

    November 20, 2009 at 5:13 pm #303962
    bandit2510
    Participant

    Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A

    Turn off mains for 3 mins, turn back on then open and close freezer door 3x. Test mode will start on its own, display will count down and any fault code will be displayed on front panel.

    November 24, 2009 at 6:27 pm #303963
    Taff
    Participant

    Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A

    Tried turning off then on and opening the door 3 times but no test function carried out. Still got the F1 Code. Is there a way of cancelling the alarm code. Scratching my head on this one?
    Regards

    Taff

    November 24, 2009 at 6:50 pm #303964
    bandit2510
    Participant

    Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A

    I have looked at the diagram for this model and it was built b4 the test sequence was introduced. You cannot remove fault manually. F1 is displayed where? check water dispenser/valve, defrost heater, build up of crap behind lower grill (where water filter fits) if all ok it will be main pcb at the rear.

    November 24, 2009 at 8:58 pm #303965
    Taff
    Participant

    Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A

    F1 is displayed on the display panel of the freezer door.

    Regards

    Taff

    November 24, 2009 at 10:00 pm #303966
    lerch
    Participant

    Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A

    F1 is change filter.

    {e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} Litres Time Degree of wear of filter

    F1 1 > 1500 > 270 High (Change the water filter)

    November 25, 2009 at 7:56 am #303967
    Taff
    Participant

    Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A

    Already changed the water filter. Everything works apart from making ice?

    December 7, 2009 at 6:11 pm #303968
    Taff
    Participant

    Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A

    Went to this again today. The fault code if it is a fault code is F1{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}. The ice maker is still not working so I took it off and put a live feed to it and the motor turned the ice ejector assy. Any ideas would be helpful.

    Regards

    Taff 😥

    December 7, 2009 at 8:17 pm #303969
    DentedPorsche
    Participant

    Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A

    Hiya,
    Press and hold the OK button till the filter percentage resets.

    HTH
    Brian 🙂

    December 8, 2009 at 3:09 pm #303970
    Taff
    Participant

    Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A

    Thanks for the info machine has now reset to 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}. However it is still not making ice. The tray is freezing the water but the ice is not being shifted to the ice compartment. The motor turns when a supply is conected to the motor assy. Any clues would be appreciated.

    Taff

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.