Hotpoint TDL11P

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint TDL11P

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • November 21, 2009 at 9:21 am #50310
    jackster
    Participant

    Hi all,
    I have got a call to this machine on Monday, basically the customer has purchased a new belt but calnt fit and called me for help.

    Never done one of these myself, any tips??

    Thanks in advance,

    Chay

    November 21, 2009 at 10:08 am #304356
    garn
    Participant

    Re: Hotpoint TDL11P

    HI BUTTY CANT FIND THE HPT PART NUMBER HEARS ONE FROM CONNECT
    Belt fitting/removal tool (5031689741125)

    November 21, 2009 at 10:12 am #304357
    jackster
    Participant

    Re: Hotpoint TDL11P

    Is there any chance of doing it without one, the job is booked in for Monday 😯
    I will deffinately order one anyway though,it will come in handy.

    November 21, 2009 at 10:33 am #304358
    garn
    Participant

    Re: Hotpoint TDL11P

    Can be A Fiddle Sometimes you can Either get it on Strait Away or end up in A bit Of A sweat.

    You Will have to From The side panel Or you may Have To remove The Plastic 4″ vent pipe or Some People try And Force it On
    by way of putting it On The motor Shaft And Round The Drum And Lifting The back Panel On . But A That’s Really Bad Move And bad Practice

    if Your A handy Guy you Could Knock one Up In About An Hour
    all You Need is A bit of Conduit Pipe A Washer That Slides Over The Pipe A hacksaw And A Welder

    i Could Send you The Schematics If You Like save You A few bob To

    Garn

    November 21, 2009 at 10:37 am #304359
    bazza500
    Participant

    Re: Hotpoint TDL11P

    If you type “Hotpoint AND belt AND fitting” into the search box there is loads of discussion on this.

    November 21, 2009 at 12:14 pm #304360
    A1_Domestics
    Participant

    Re: Hotpoint TDL11P

    Give me a call later. I’ll explain how I do it with 3 screwdrivers. Piece of p*ss.

    I’ve left my number with your daughter/wife I think.

    November 21, 2009 at 12:30 pm #304361
    jackster
    Participant

    Re: Hotpoint TDL11P

    Cheers mate!
    Ill give you a ring,
    Chay

    November 21, 2009 at 3:08 pm #304362
    iadom
    Moderator

    Re: Hotpoint TDL11P

    A1_Domestics wrote:

    I’ve left my number with your daughter/wife I think.


    Or girlfriend 😉 😀

    November 21, 2009 at 6:39 pm #304363
    bazza500
    Participant

    Re: Hotpoint TDL11P

    or Mistress 😀

    November 22, 2009 at 11:32 am #304364
    garn
    Participant

    Re: Hotpoint TDL11P

    All Done Butty
    Check Your Email

    1x belt tool And A Drum locking tool Saves Bending Saves Your Fingers From That Sharp Alloy also removes The Inner bearing Race.

    Garn Solutions 😉

    November 22, 2009 at 1:29 pm #304365
    jackster
    Participant

    Re: Hotpoint TDL11P

    iadom wrote:

    A1_Domestics wrote:

    I’ve left my number with your daughter/wife I think.


    Or girlfriend 😉 😀

    14 year old daughter as it happens 😀

    November 22, 2009 at 7:16 pm #304366
    gandh1
    Participant

    Re: Hotpoint TDL11P

    couldnt get on with hpt belt tool.

    so i modified it. with an old bike seat post tube. now much more leverage. maybe i should have modified myself tho and grown some muscles?!?

    ❗
    ps jackster check ur front bearing, if its has the metal lip & felt support worn down to next to nothing, and has caused the drum to jam and therefore belt to snap, its a lot of hassle to sort out
    see here—>http://www.ukwhitegoods.co.uk/modules.php?name=Forums&file=viewtopic&t=48175

    good news is still my labour intesive slight-bodge (original parts no longer supplied) repair seems to be working fine (touch wood) but i spent 2 hours in the work shop polishing the scrapes out of the inside of the drum with w&d, brillo, and polish… never again!

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.