Zanussi ZWD1260W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWD1260W

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 27, 2009 at 9:51 pm #50519
    Clives
    Participant

    Just had a look at this machine, it fills, heats and washes ok. When it is put on spin, it drains then the drum rotates slowly in alternate directions, then just as it ramps up to spin the machine shuts off after powering up the drier motor briefly then advancing the timer to stop.
    Ive checked main motor windings, brushes and tacho, also tried running machine with drier element disconnected.
    This machine uses the hybrid type timer.
    Any ideas thanks.

    November 27, 2009 at 10:08 pm #305094
    Jonah
    Participant

    Re: Zanussi ZWD1260W

    Does it try to spin a couple of times then the timer goes to stop position, if it does its the triac on the PCB borad short circuited

    November 27, 2009 at 10:31 pm #305095
    leavemetogetonwithit
    Participant

    Re: Zanussi ZWD1260W

    Is it this one?
    http://www.emwelec.co.uk/index.php?acti … revstart=0
    Wish I’d known it just needed a triac, could have made myself a few quid a few weeks ago.
    Mike.

    November 29, 2009 at 4:05 pm #305096
    Clives
    Participant

    Re: Zanussi ZWD1260W

    It just about starts the spin, just after the distribute 55 rpm right and left it starts to ramp up to about 100 to 200 rpm then shuts off and goes to stop. (if it was the triac wouldnt it just go flat out spin)
    Thaks for your help. Clive

    November 30, 2009 at 8:29 pm #305097
    cab
    Participant

    Re: Zanussi ZWD1260W

    possibly pressure system problem? have sent you mail

    November 30, 2009 at 8:41 pm #305098
    timdowning
    Participant

    Re: Zanussi ZWD1260W

    Definitely timer. £60 from Connect.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.