- This topic has 4 replies, 4 voices, and was last updated 16 years, 4 months ago by
.
-
Posts
-
According to the FD number made in 2002. When you switch it on , even if the door is open, The drain pump activates and is filling at the same time constantly. Flood switch not activated. Also the small display all the segments are lit up. I’m guessing computer?
Re: Siemens SE24A230GB/17 Hydrosensor dishwasher
Micky 32 wrote:I’m guessing computer?
Good guess but I suspect something has caused the ‘control module’ to blow in the first place? Take it off and look closely at what (if any?) damage is on the board? Then trace the nearest plug in connectors adjacent to where the board has blown. Trace the wires to the guilty component.
All the above information assumes that the flood switch hasn’t been activated of course. 😉
Re: Siemens SE24A230GB/17 Hydrosensor dishwasher
Agree with Martin. Your find a triac with a blown top if you look carefully. If your lucky it will be the dispenser otherwise it’s usually diverter motor on the heater box 😥
Re: Siemens SE24A230GB/17 Hydrosensor dishwasher
Thanks for the reply lads, so it’s module related. Have to go back later and strip, didn’t have time earlier. Probably not worth fixing anyway? First thing i checked was the flood switch. It was ok.
Re: Siemens SE24A230GB/17 Hydrosensor dishwasher
PINKY wrote:Agree with Martin. Your find a triac with a blown top if you look carefully. If your lucky it will be the dispenser otherwise it’s usually diverter motor on the heater box 😥
Has anyone had any joy replacing this triac?
If so, is there a part number for it, or have you scavenged one from an old board?I’ve got one with a blown diverter valve triac!
Pigpen.
- You must be logged in to reply to this topic.