Hpt’ WF101 flashing like crazy

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hpt’ WF101 flashing like crazy

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 15, 2009 at 8:31 am #50960
    Seamy
    Participant

    Led’s from top to bottom on left 1 2 3 4 flashing along with 5th across (final spin) & On/Off led flashing rapidly when power switched on at wall. Any ideas, i’ve looked at fault code section on here but none the wiser.
    Thanks in advance.

    December 15, 2009 at 9:05 am #306478
    aqualectric
    Participant

    Re: Hpt’ WF101 flashing like crazy

    Power supply on the PCB – EMW for a replacement. Make sure you have the correct type when ordering though; there is either ICT FT (Mk4) or ICT FCT (Mk8) fitted to this range. The ICT letters are found at the end of the PCB printed in little boxes.

    HTH,

    Steve.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.