Hotpoint AQGD 169S

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint AQGD 169S

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 17, 2009 at 3:39 pm #51027
    peeler40
    Participant

    First time i have seen one of these machines .The mains filter is o.k.
    and the light that iluminates the inside of the drum works when the door is
    open , but thats your lot no error code nothing .I Know this will sound
    silly but there is a spare wire (green) from the door harness which terminates
    near the door harness plug .The end of the wire is still bare as if it has never been connected and all the connectors with in the radius of the wire seem
    perfect .The machine finished its last wash o.k. and has not worked since ,any ideas .

    December 17, 2009 at 7:08 pm #306668
    johnnyj
    Participant

    Re: Hotpoint AQGD 169S

    you dont realy get much problems with these to be honest, i’ve never come across that fault before, i have had a couple of duff front pcbs i usaly plug one in from a WF machine and see if it lights up, as for the spare green wire thay all ahve that and serves no purpose as far as i can see. jj

    December 19, 2009 at 12:54 pm #306669
    peeler40
    Participant

    Re: Hotpoint AQGD 169S

    Thank you for your fast reply , The machine is only 14 months old and
    has i have no expieriance of this machine i decided to pass the job over ,

    Best Wishes Billy

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.