- This topic has 4 replies, 3 voices, and was last updated 16 years, 3 months ago by
.
-
Posts
-
Hiya
I was doing a wash and instead of hitting the pause button I hit the power button, now my machine has no lights and no power (apparently) It was halfway through the spin cycle. Machine is a f&p smart drive pride 5.5 MW059AUAny advice is greatly appreciated
CherRe: fisher paykel has no power
Moved you to the Oz forum Cher. 😉 You will still be likely to get an answer from your favourite feathered friend in here. 8)
Re: fisher paykel has no power
The Pump in this Model forms part of the power circuit
It may well be the pump If not it will be The Main PCB (Motor Controller)Re: fisher paykel has no power
iadom wrote:Moved you to the Oz forum Cher. 😉 You will still be likely to get an answer from your favourite feathered friend in here. 8)
Thankyou…………………..merry xmasRe: fisher paykel has no power
bigsmokepiker wrote:The Pump in this Model forms part of the power circuit
It may well be the pump If not it will be The Main PCB (Motor Controller)
pump is new as is power board…………the board behind the buttons. Im wondering does this machine has a reset button? It was working fine,halfway through spin cycle and I pressed the power button instead of the pause button……….I have unplugged it and replugged it and turned it on but still no lights………..could I have dameaged it by pressing the power button while it was spinning?thanks mate
Cher
- You must be logged in to reply to this topic.