fisher paykel has no power

[blackduck]

Hiya
I was doing a wash and instead of hitting the pause button I hit the power button, now my machine has no lights and no power (apparently) It was halfway through the spin cycle. Machine is a f&p smart drive pride 5.5 MW059AU

Any advice is greatly appreciated
Cher

[iadom]

Re: fisher paykel has no power

Moved you to the Oz forum Cher. 😉 You will still be likely to get an answer from your favourite feathered friend in here. 8)

[bigsmokepiker]

Re: fisher paykel has no power

The Pump in this Model forms part of the power circuit
It may well be the pump If not it will be The Main PCB (Motor Controller)

[blackduck]

Re: fisher paykel has no power

iadom wrote:Moved you to the Oz forum Cher. 😉 You will still be likely to get an answer from your favourite feathered friend in here. 8)

Thankyou…………………..merry xmas

[blackduck]

Re: fisher paykel has no power

bigsmokepiker wrote:The Pump in this Model forms part of the power circuit
It may well be the pump If not it will be The Main PCB (Motor Controller)

pump is new as is power board…………the board behind the buttons. Im wondering does this machine has a reset button? It was working fine,halfway through spin cycle and I pressed the power button instead of the pause button……….I have unplugged it and replugged it and turned it on but still no lights………..could I have dameaged it by pressing the power button while it was spinning?

thanks mate
Cher

[Author]

Posts