ignis adl 347 dishwasher problem

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › ignis adl 347 dishwasher problem

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • December 29, 2009 at 3:22 pm #51228
    vinnyvegas
    Participant

    I have started the programe for our dishwasher this morning and there is a constant beeping from the dishwasher. I have tried to reset the programe (water is still where the float/water indicator is and in the bottom where the filter is) to no avail. Any ideas please or if I can download a guide.
    Thanks.

    December 30, 2009 at 12:48 am #307310
    Penguin45
    Participant

    Re: ignis adl 347 dishwasher problem

    Ignore the beeps – count the pattern of the flashing start light; ie 1-2-3-4-pause-repeat.

    Penguin45.

    December 30, 2009 at 8:35 am #307311
    vinnyvegas
    Participant

    Re: ignis adl 347 dishwasher problem

    Hi, the light appears to flash 4 times then repeats.

    December 30, 2009 at 7:30 pm #307312
    deltra
    Participant

    Re: ignis adl 347 dishwasher problem

    f4 fault= drainage problem,pump/pipes blocked?

    December 30, 2009 at 8:08 pm #307313
    vinnyvegas
    Participant

    Re: ignis adl 347 dishwasher problem

    Thanks for the reply.
    Any info on how to deal with blockage would be appreciated.
    Thanks.

    December 30, 2009 at 10:28 pm #307314
    vinnyvegas
    Participant

    Re: ignis adl 347 dishwasher problem

    Hi Deltra,j ust noticed that you are from Workington, if I can not get the dishwasher sorted could you recommend someone to have a look as I am from Whitehaven.
    Small world!!!

    December 31, 2009 at 12:55 am #307315
    Penguin45
    Participant

    Re: ignis adl 347 dishwasher problem

    In the meantime, and if you are of a practical bent……

    Bail out as much water as you can. Pull the plug. Remove the lower front cover plate. The drain pump is at the front and is a twist fit to remove. There may be a foreign object in there, or the pump my have failed. The impellor should resist and “ping” quite freely when turned manually; he coil should read somewhere around 200 ohms if metered.

    Penguin45.

    December 31, 2009 at 5:15 pm #307316
    deltra
    Participant

    Re: ignis adl 347 dishwasher problem

    vinny, ill come and have a look 😛 (been in whitehaven today :rolls: )call me next week. 07733020290.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.