Ariston A1637 (LB2000TRF) Error Flash – What does it mean?

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Ariston A1637 (LB2000TRF) Error Flash – What does it mean?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 29, 2009 at 11:11 pm #51249
    wmcnicol
    Participant

    Hi,

    My Ariston washing machine is refusing to work.

    Error flashes as follows:

    Door Lock Led: Fast flash
    Rapid Wash Led: Flash.

    I have been unable to find a service manual describing the fault flashes. 🙁

    When started, will open water inlet for a few seconds – then close it. Then usually just pumps out. Pump continues to run after whatever water is present has been pumped out.

    Any ideas?

    Thanks,

    William.

    December 30, 2009 at 1:04 am #307384
    Penguin45
    Participant

    Re: Ariston A1637 (LB2000TRF) Error Flash – What does it mea

    Motor problems. Check wiring for continuity and breakages. Check continuity through motor. Being an Indesit-based machine the problem is probably the pcb.

    Be warned – this machine uses a high speed three phase induction motor. As a consequence, the capacitors on the pcb may store a charge of up to 500v for a period of ten minutes after programme completion.

    Pulling the plug is not enough – you have to wait.

    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.